skip to main text

Turning the Printer On and Off

Turning on the printer

  1. Open the rear tray cover.

    The paper output slot cover opens automatically.

  2. Press the ON button until the ON lamp is lit to turn on the printer.

    Note

    • It may take a while for the printer to start printing immediately after you turn on the printer.

    • If an error message is displayed on the LCD, see When Error Occurred.

    • You can set the printer to automatically turn on when a print operation is performed from a computer connected by USB cable or wireless network. This feature is set to off by default.

      From the printer

      From the computer

    • If you use the battery, make sure that it is charged. For details on how to check it, refer to Using the Battery.

Turning off the printer

  1. Press the ON button for more than one second to turn off the printer.

    Important

    • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off.

    • If you stand the printer up or carry the printer before the ON lamp goes off, this may cause the ink to leak or the printer to break.

    Note

    • It may take up to 40 seconds until the power is turned off.

    • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval. This feature is set to on by default.

      From the printer

      From the computer